Sharpen, repair, damage and paint effects
This page lists the second group of effects added to the effects library for version 1.2. They sit in the folders named below (Toolbox > Effects). Put one on a clip, or on an adjustment clip to act on every track below it, and change its settings in the Inspector. Anything that looks random (dirt, tape noise) is the same on every playback and every export of the same frame; the Seed setting picks another pattern.
Sharpen
-
Sharpen Edges. Sharpens only the real edges and leaves flat areas and fine texture alone. Edge Threshold is how strong a step must be to count as an edge; Halo Limit stops the bright and dark rims that over-sharpening makes.
-
Soften and Sharpen. Softens fine texture such as skin pores (Soften) while sharpening the larger edges (Sharpen). Texture Limit decides what still counts as fine texture.
The plain Sharpen and Unsharp Mask effects in the Blur folder stay as they were.
Texture
-
Texture Pop. Brings out the fine texture of surfaces, such as fabric, stone and skin detail, without changing the large tones. Highlight Protection keeps bright areas from clipping.
-
Detail Recovery. Lifts deep shadows and calms bright highlights while keeping the detail inside them, and can add more detail on top (Detail).
-
Analog Damage. A worn videotape: Line Jitter, Color Bleed, Noise, a Tracking Error band at the bottom and Scanlines.
-
Film Damage. Old film: Dirt, Scratches, a dark Vignette, Softness, Gate Weave and Flicker.
-
JPEG Damage. Makes the picture look like a badly compressed JPEG: visible blocks, steps in smooth areas and blotchy color. Lower Quality is worse; Block Size changes the grid.
Revival
-
Deband. Smooths the visible steps in skies and gradients and dithers them away. Threshold is the biggest step it will smooth, so real edges stay.
-
Dead Pixel Fixer. Finds single stuck bright or dark pixels, which differ from all their neighbours, and replaces them with the average of the neighbours. Defect Size is the width of the defects to look for; Detect limits it to bright or dark ones.
Refine
- Beauty. Smooths skin and other blotchy areas but keeps edges, with Smoothing, a Smoothing Size, an Edge Sensitivity and Detail Recover that gives back a share of the fine texture so the result does not look plastic. It does not find faces; switch on Skin Tones Only to limit it to skin-colored areas.
Stylize
-
Watercolor. Flat washes of color with darker pooled edges and paper grain. Brush Size is the size of the washes.
-
Stylize. Three styles: Relief (lit from the Light Angle), Ink Outline (flat colors with black lines) and Cutout (flat colors). Levels is the number of colors per channel in the last two.
Light
-
Aperture Diffraction. Starburst spikes from the bright lights: Spikes, Length, Threshold (how bright a light must be), Intensity, Rotation and a Tint.
-
Lens Reflections. Faint colored reflections of the bright lights, mirrored through the lens center (move it with Center X / Y): Reflections is how many, Spread how far from the lights, Softness how out of focus.
Color, Key and Transform
-
Color Palette (Color). Finds the dominant colors of the picture and shows them as a strip of swatches at the Position you pick, biggest first.
-
3D Keyer (Key). Keys out up to three picked colors. It compares colors in color space, so it catches all the shades of one screen color in one go. Tolerance and Softness set how far from the picked colors a color is still keyed, Brightness Weight how much brightness counts, Clip Black and Clip White tidy the matte, and View shows the matte. Use the eyedropper next to Color 1 to pick from the viewer. See also Remove a green screen.
-
Video Collage (Transform). Shows the picture again in a grid of tiles: Columns, Rows, Spacing, Corner Radius, a Shadow, and how the picture fits each tile.
Found a mistake? Edit this article on GitHub.