← Guide

Vim mode: quick start

This is a short, step-by-step lesson for people who have never used Vim mode (or Vim itself). It takes about fifteen minutes. When you are done, the cheat sheet lists all the keys, and Vim for Kinoklip explains everything in detail.

The idea in one minute

Normally a key does one thing: B picks the blade, Delete deletes. In Vim mode, keys are short words you combine, like a tiny language:

  • w means "the next clip", d means "delete". So dw deletes up to the next clip.
  • A number in front repeats it: 3w jumps three clips ahead, 3dd deletes three clips.
  • You never need to hold Ctrl or Shift for everyday editing, and your hands stay on the letters.

Vim mode has modes, and the word at the left of the page bar (the row with the page buttons) always tells you which one you are in:

Mode line says What it means
NORMAL Keys are commands. Pressing d deletes, it does not type a "d". You are here most of the time.
INSERT Keys work like they did before Vim mode (Space plays, your usual shortcuts work).
VISUAL You are selecting. Moving grows the selection.
COMMAND You are typing a command after :

If you are ever lost, press Esc (once or twice). It always brings you back to NORMAL and cancels whatever was half typed. Nothing gets deleted by pressing Esc.

Step 1: turn it on

  1. Open Kinoklip > Preferences… (Ctrl+,), go to Keyboard and tick Vim mode.
  2. Click OK, then look at the left end of the page bar: it now says NORMAL.

To turn it off later, untick the same box (or type :set novim). Your normal shortcuts come back at once.

Step 2: get something to practise on

  1. Open a project and put three or four clips next to each other on V1 (drag them from the Media Pool with the mouse, as usual). Give them different names if you can.

  2. Click once on the timeline so it has the keyboard focus (it gets a coloured frame).

Step 3: move around

Vim mode has a cursor: it is the playhead, on one track at a time (the cursor track). Try these keys and watch the playhead:

Press What happens
l / h one frame right / left (hold it to keep going)
} / { one second right / left
w jump to the start of the next clip
b jump back to the start of this clip (or the previous one)
e jump to the end of the clip
0 / $ the very start / the very end of the timeline
j / k move the cursor down / up one track (V1, V2, A1, ...)

Now try a number: press 2 and then w. You jump two clips at once.

Step 4: your first edits

Put the cursor on the second clip (0, then w).

Press What happens
s split the clip at the cursor
u undo (press it again to undo more)
Ctrl+R redo
dd delete the clip under the cursor; the clips after it move left to close the gap
u bring it back
yy then p copy the clip, then paste it at the cursor
. repeat the last change (after dd, . deletes the next clip too)

Every one of these is a single undo step, so u always takes back exactly one thing you did.

Step 5: combine a command with a movement

This is the heart of Vim. Take a command (d delete, y copy, c change) and follow it with any movement from Step 3. The command works on everything the movement passes over:

Press What happens
dw delete from the cursor to the next clip
d} delete one second from the cursor
d$ delete everything from the cursor to the end
y2w copy the next two clips
d3w delete three clips' worth

Undo with u after each one to try the next.

Step 6: select with VISUAL

  1. Press V (capital). The mode line says V-LINE and the clip under the cursor is selected.
  2. Press w twice. The selection grows over the next clips.
  3. Press d to delete them, or y to copy them. Or press Esc to cancel.

(Lower-case v selects frames instead of whole clips.)

Step 7: the Space menu

Space opens a menu of everything else. Press Space and wait half a second: a list pops up showing which keys can come next and what they do. You do not need to remember anything; just read the list.

Try these:

Press What happens
Space Space play / pause (Space alone no longer plays in NORMAL)
Space m a add a marker
Space i i / Space i o Mark In / Mark Out
Space f e search for an effect or transition and put it on the clip under the cursor
Space f f search your media

In the search windows (Space f ...), type a few letters to filter, move with Ctrl+J / Ctrl+K or the arrow keys, and press Enter to pick.

Step 8: change values in the Inspector

  1. With the cursor on a clip, press Space w i. The Inspector gets the keyboard focus and a frame marks one row (for example Zoom).

  2. j / k move to the next / previous row.

  3. Ctrl+A raises the value one step, Ctrl+X lowers it. 10 Ctrl+A raises it ten steps.
  4. To type an exact number: press i, type it, press Enter.
  5. dd resets the row to its default.
  6. Keyframes: move the playhead, then press Space k k on a row to add a keyframe there (press it again to remove it). ]k / [k jump to the next / previous keyframe.

  7. Press Space w t to go back to the timeline.

Text works the same way: on the Title tab, go to the text row, press i, type, then Esc.

Step 9: move between panels

Press What happens
Ctrl+H Ctrl+J Ctrl+K Ctrl+L move to the panel on the left / below / above / right
Space w + letter jump to a panel: t timeline, i Inspector, m Media Pool, e Effects, v viewer, k Keyframes, x Mixer
gt / gT next / previous page (Media, Cut, Edit, ...)

In the Media Pool and other lists, j / k move up and down, Enter opens, h goes back up a folder and / searches.

Step 10: the command line

Press : and type a command, then Enter:

Type What happens
:w save the project
:q quit
:120 go to frame 120
:01:00:05:00 go to that timecode
:help open this guide

Press Tab while typing to see suggestions.

When you want the old keys back for a moment

Press i. The mode line says INSERT and your usual shortcuts work again (Space plays, B blade, and so on). Press Esc to go back to NORMAL.

Five things to remember

  1. Look at the mode line: it tells you what your keys will do.
  2. Esc always gets you out.
  3. u undoes, one step at a time.
  4. Space, then wait: the menu shows you what you can do.
  5. Command + movement: d + w = delete to the next clip.

Next: keep the cheat sheet open while you work, and read Vim for Kinoklip for the rest (registers, macros, search, the Keyframes panel, nodes, the mixer and changing the keys).